Language:

Tech specs

Transmitter Fibra

Wired module to integrate one third-party device into the Ajax system

Transmitter Fibra

Devices compatibility

Check

Communication

Fibra communication technology

Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection.

Key features:

  • Two-way communication.
  • Advanced anti-sabotage.
  • Block encryption featuring a dynamic key.
  • Instant notifications.
  • Remote configuration in the Ajax apps.

Line connection

4-core cable

Connection

to any point of the Fibra line

Transmitter Fibra can be installed after a hub, detector, keypad, or siren.

Fibra line length

up to 6,500 ft

When using the U/UTP cat.5 twisted pair cable.

Encrypted communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Wired devices connection

Supported configurations

  • roller shutter
  • tamper
  • wired device with 15 event types

Connector pins

  • 12V — power supply output for a wired detector
  • GND — ground
  • Z1–Z2 — inputs for connecting a wired detector
  • COM — common input for connecting signal contacts of a wired detector

Transmitter Fibra has 2 inputs (Z1 and Z2) to connect the wired detector using the AATT (i.e., Alarm Alarm Tamper Tamper) scheme.

Type of connection

NO, NC, EOL, 2EOL, 3EOL

With EOL total resistance from 1 kΩ to 40 kΩ with a 100 Ω increment.

Cable length

up to 3 m

When using a signal cable with a 0.22 mm² copper conductor.

Operation mode

pulse, bistable

Event types

15 event types of wired devices

  • Tamper alarm
  • Intrusion
  • Fire
  • Auxiliary alarm
  • Panic button
  • Gas alarm
  • Malfunction
  • Leakage
  • Glass break
  • High temperature
  • Low temperature
  • Masking
  • Duress code (opening)
  • Vibration (seismic sensor)
  • Custom

Adjusted by a PRO or a user with admin rights in the Ajax app.

Recommendations

Transmitter Fibra should be installed inside the wired detector case. The module requires a space with the following minimum dimensions: 1.57″ × 0.59″ × 0.48″

Sabotage protection

Protection against spoofing

device authentication

Instant line damage detection

Valid for EOL, 2EOL, or 3EOL connections.

Communication loss detection

after 36 s

Between the hub and Transmitter Fibra. It can be changed in the hub settings.

Power supply

Fibra line

7–30 V⎓, up to 200 mA

The hub powers the module.

Output to the connected wired device

10.5–15 V⎓, up to 50 mA (total maximum current consumption)

One power supply line from Transmitter Fibra.

Board

Dimensions

1.57″ × 0.59″ × 0.48″

Weight

0.21 oz

Operating temperature range

from −13 °F to +122 °F

Operating humidity

up to 75%

Electric shock protection

Class II

ttx
ttx

Complete set

Transmitter Fibra

Accessory 5-pin cable

Quick start guide

Certification and compliance with standards

Transmitter Fibra

Transmitter Fibra

Compliance with the security alarm standards

Certificate issued by TREZOR TEST s.r.o.

EN 50131-1:2006 / A1:2009 / A2:2017/ A3:2020

EN 50131-3:2009

PD 6662:2017*

Security Grade (SG)

Certificate issued by TREZOR TEST s.r.o.

3

Restriction of Hazardous Substances Directive (RoHS)

Test report issued by Shenzhen NTEK Testing Technology Co.

EN IEC 63000:2018

Electromagnetic Compatibility Directive (EMC)

Certificate issued by MiCOM Labs

EN 55032:2015+A1:2020

EN 55035:2017+A11:2020

Environmental class according to EN 50131

Certificate issued by TREZOR TEST s.r.o.

II

PSTI UK

Schedule 1

Additional information

Compliance with standards

Learn more

Warranty

24 months

Learn more

User manual

Learn more