United StatesTech specs
MotionCam Fibra
Wired IR motion detector supporting photos by alarm feature
Devices compatibility
CheckCommunication
Fibra communication technology
Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection.
It features:
- Two-way communication.
- Advanced anti-sabotage.
- Instant notifications.
- Remote configuration in the Ajax apps.
Line connection
4-core cable
Fibra line length
up to 6,550 ft
When using the U/UTP cat.5 twisted pair cable.
Encrypted communication
Detection
Sensitive element
1 PIR sensor
Motion detection distance
up to 39 ft
When installed at the height of 7.9 ft.
* — 10 m according to INCERT (with high sensitivity level)
Motion detection angles
horizontal — 88.5°
Motion detection speed
from 1 to 6.6 ft/s
The direction of the detector lens should be perpendicular to an alleged intrusion path into the room.
Sensitivity
4 levels
Adjusted by a PRO or user with admin rights in the Ajax app.
Pet immunity
up to 44 lb
up to 1.6 ft in height
False alarm prevention
SmartDetect
Software algorithm.
Temperature compensation
Effective motion detection within 14°F to 104°F range.
Photo verification
Photo by alarm
The built-in camera is activated if the detector is armed and motion is detected.
Adjustable photo resolution
640 × 480 px
320 × 240 px (default)
160 × 120 px
Adjusted by a PRO or user with admin rights in the Ajax app.
IR backlight
For night photography and low light conditions.
Series of pictures
from 1 to 5 snapshots
Adjusted by a PRO or user with admin rights in an Ajax app.
Photo delivery
up to 7 s — 160 × 120 px resolution
up to 9 s — 320 × 240 px resolution
up to 20 s — 640 × 480 px resolution
Photo delivery time depends on the image resolution selected in the device settings.
Recommendations
It is recommended to install the detector at the height of 7.9 ft. The device is designed for indoor use only.
Sabotage protection
Tamper alarm
2 tampers
Both are needed to fasten the left or right side of the detector’s mounting panel. The system receives notifications about attempts to detach the device from the surface or remove it from the mounting panel.
Protection against spoofing
device authentication
Main power supply
Fibra line power supply
7−30 V⎓, up to 120 mW
The detector is powered by the control panel.
Detector’s nominal operating voltage
24 V⎓
Quiescent detector’s current consumption at nominal voltage
0.569 mA
Maximum detector’s current consumption at nominal voltage
14.2 mA
Auxiliary power supply
Sealed battery
LTO AA
It is used when the detector takes photos, activates an IR backlight, and transmits an alarm. The battery is charged from the Fibra line.
Detector’s nominal operating voltage
2.4 V⎓
The detector is powered by the sealed battery.
Quiescent detector’s current consumption at nominal voltage
0.001 µA
Maximum detector’s current consumption at nominal voltage
568.7 µA
Enclosure
Dimensions
5.31" × 2.75" × 2.60"
Weight of the black device
4.97 oz
Weight of the white device
5.64 oz
Operating temperature range
from 14 °F to 104 °F
Operating humidity
up to 75%
Protection class
IP50, IK04
Colours
Black
White
Complete set
MotionCam Fibra
SmartBracket mounting panel
Installation kit
Quick start guide
Certification and compliance with standards
MotionCam Fibra
MotionCam Fibra
Compliance with the security alarm standards
Certificate issued by TREZOR TEST s.r.o.
EN 50131-2-2
EN 50130-4+A1
EN 50130-5
EN 50131-1
PD 6662:2017*
Security Grade (SG)
Certificate issued by TREZOR TEST s.r.o.
2
Restriction of Hazardous Substances Directive (RoHS)
Test report issued by Shenzhen NTEK Testing Technology Co.
EN 63000:2018
Electromagnetic Compatibility Directive (EMC)
Certificate issued by MiCOM Labs
EN 55032:2015+A1:2020
EN 55035:2017+A11:2020
Environmental class according to EN 50131
Certificate issued by TREZOR TEST s.r.o.
II
PSTI UK
BSI Assurance UK Limited
Schedule 1