Tech specs
KeyPad S Plus Jeweller
Wireless touch keypad with support for encrypted contactless cards and key fobs. Superior edition
Devices compatibility
Communication
Jeweller communication technology
Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote configuration in the Ajax apps.
Frequency bands
868.0–868.6 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Automatic power control to reduce power consumption and noise interference.
Radio signal modulation
GFSK
Radio signal range
up to 5,500 ft
Between keypad and control panel (or range extender) in an open space.
Encrypted communication
All the data stored and transmitted are protected by block encryption with a dynamic key.
Frequency hopping
Radio communication uses frequency hopping to prevent interception and jamming.
Key features
Sensor type
capacitive
Malfunctions and security mode indication
When KeyPad S Plus is active, it notifies with an LED indication of the security mode, problems with detectors, or communication loss with the hub.
Functional button
Operates in one of the modes.
alarm
The system sends an alarm to the central monitoring station and users. It also activates the sirens connected to the system.
mute fire alarm
Mutes interconnected fire detectors alarms.
off
The button is disabled.
Contactless control
Pass cards
Tag key fobs
The functionality of the cards/key fobs is the same, but they differ in design.
Access codes
up to 200 personal codes
One code per each user. The number of personal access codes depends on the hub model.
1 keypad code
One code per KeyPad S Plus.
Duress codes
up to 200 personal codes
One code per each user. The number of personal duress codes depends on the hub model.
1 keypad code
One code per KeyPad S Plus.
Codes for unregistered people
up to 99 personal codes
For people who are not registered in the system. The number of such codes depends on the hub model.
Group security management
Enter the general keypad code and the group ID to manage group security.
ACE Type
type B
Recommendations
The device is designed for indoor use only.
Sabotage protection
Protection against code guessing
KeyPad S Plus locks for 3-180 minutes if an incorrect code is entered more than 3 times in a row within 1 minute.The lock time is adjusted by PRO or user with admin rights in the Ajax app.
Tamper alarm
Notifications on attempts to detach the keypad from the surface or remove it from the mounting panel.
Protection against spoofing
device authentication
Communication loss detection
after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.
Power supply
Batteries
4 × AA
Pre-installed.
Type
Type C.
Calculated battery life
up to 3 years
Keypad’s operating voltage range
2.25–3.3 V⎓
Keypad’s nominal operating voltage
3 V⎓
Quiescent keypad’s current consumption at nominal voltage
0.13 mA
Maximum keypad’s current consumption at nominal voltage
10.5 mA
Full capacity
6,000 mAh
Low battery voltage
2.5 V⎓
Low battery recovery voltage
2.7 V⎓
End-of-life battery voltage
2.25 V⎓
Device is switched off.
End-of-life battery capacity
500 mAh
Manufacturer
Energizer
Enclosure
Dimensions
6.50″ × 4.45″ × 0.79″
Weight
9.42 oz
Operating temperature range
from 14℉ to 104℉
Operating humidity
up to 75%
Colours
Black
White
Complete set
KeyPad S Plus Jeweller
SmartBracket mounting panel
4 AA batteries (pre-installed)
Installation kit
Quick start guide