Language:

Tech specs

DoorProtect Plus Jeweller

Wireless combined opening, shock and tilt detector with reed switch and accelerometer

DoorProtect Plus Jeweller

Devices compatibility

Check

Communication

Jeweller communication technology

Proprietary wireless technology to transmit alarms and events.

Features:

  • Two-way communication.
  • Advanced anti-sabotage.
  • Block encryption featuring a dynamic key.
  • Instant notifications.
  • Remote configuration via the Ajax apps.

Radio frequency bands

866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz*
915.85–926.5 MHz
921.0–922.0 MHz

Depends on the sales region.

* Certified according to UL/ULC standards.

Maximum effective radiated power (ERP)

up to 20 mW

Radio signal modulation

GFSK

Radio communication range

up to 3,900 ft

Between the detector and a hub (or radio signal range extender) in an open space.

Encrypted communication

All the data stored and transmitted are protected by block encryption with a dynamic key.

Frequency hopping

To prevent radio interference and radio signal interception.

Detection

Sensitive elements

1 × accelerometer
1 × reed switch

The magnet should be installed to the right of the detector.

Additional detector connection

Third-party wired detector with the NC (normally closed) contact type.*

* Must be UL certified.

Shock sensitivity

3 levels

Adjusted by a PRO or user with admin rights in the Ajax app.

Option to ignore single shock

Adjusted by a PRO or user with admin rights in the Ajax app.

Tilt sensor activation threshold

from 5° to 25°

Adjusted by a PRO or user with admin rights in the Ajax app.

Recommendations

The magnet is mounted to the right of the detector. It can be placed horizontally.
Do not install the detector with the LED indicator facing down, as this may cause it to fall and fail due to damage.
Device is designed for indoor use only.

Anti-sabotage protection

Tamper alarm

Notifications of attempts to tear off the detector from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Power supply

Battery

1 × CR123A

Pre-installed.

Type

type C

Calculated battery life

up to 5 years

Device’s nominal operating voltage

3 V⎓

Quiescent device’s current consumption at nominal voltage

11.8 μA

Maximum device’s current consumption at nominal voltage

24 mA

Full battery capacity

1,600 mAh

Low battery voltage

2.5 V⎓

Low battery recovery voltage

2.7 V⎓

End-of-life battery voltage

2.1 V⎓

Device is switched off.

End-of-life battery capacity

300 mAh

Manufacturer

Huiderui

UL listed.

Enclosure

Dimensions

Ø 0.79″ × 3.54″

Weight

1.02 oz

Operating temperature range

from 14 °F to 104 °F

Temperature range from 32 °F (0 °C) to 120 °F (+49 °C) is certified according to UL/ULC standards.

Operating humidity

up to 75%

Humidity of up to 85% is certified according to UL/ULC standards.

Protection class

IP50

ttx
ttx

Colours

Black

White

Complete set

DoorProtect Plus Jeweller

SmartBracket mounting panel

CR123A battery (pre-installed)

Big magnet

Small magnet

Terminal to connect a third-party detector

Installation kit

Quick start guide

Certification and compliance with standards

DoorProtect Plus Jeweller

DoorProtect Plus Jeweller

Compliance with the security alarm standards

Certificate issued by TREZOR TEST s.r.o.

EN 50131-1:2006 / A1:2009 / A2:2017

EN 50131-2-6:2008

EN 50131-2-8:2016

EN 50131-5-3:2017

PD 6662:2017*

Security Grade (SG)

Certificate issued by TREZOR TEST s.r.o.

2

Radio Equipment Directive (RED)

EN 300 220-1 V3.1.1

EN 300 220-2 V3.2.1

Restriction of Hazardous Substances Directive (RoHS)

Test report issued by Shenzhen NTEK Testing Technology Co.

EN IEC 63000:2018

Electromagnetic Compatibility Directive (EMC)

Certificate issued by MiCOM Labs

EN 301 489-1 V2.2.3

EN 301 489-3 V2.1.1

Low Voltage Directive (LVD)

Certificate issued by MiCOM Labs

EN 62479:2010

EN 62368-1:2014+A11:2017

Environmental class according to EN 50131

Certificate issued by TREZOR TEST s.r.o.

||

FCC ID

Certificate issued by MiCOM Labs

2AX5VDRPRPL-NA

IC ID

Certificate issued by MiCOM Labs

26860-DRPRPLNA1

CSA

CSA Group Testing & Certification Inc.

ANSI/UL 62368-1:19

CSA C22.2 No. 62368-1:19

Standard for Intrusion-Detection Units

UL LLC

UL 639

ULC S306 (Canada)

Household Burglar-Alarm System Units

UL LLC

UL 1023

Commercial Premises Security Alarm Units and Systems

UL LLC

UL 2610

Standard for Control Units, Accessories and Receiving Equipment for Intrusion Alarm Systems

UL LLC

ULC S304 (Canada)

PSTI UK

BSI Assurance UK Limited

Schedule 1

Additional information

Compliance with standards

Learn more

Warranty

24 months

Learn more

User manual

Learn more