United States
MotionCam Outdoor HighMount (PhOD) Jeweller
Wireless IR motion detector that takes on-demand photos and photos by alarm, schedule, and scenario. For outdoor installation at a height of 2–4 m.
Coming soon
All threats detected and verified
MotionCam Outdoor HighMount (PhOD) Jeweller is a wireless motion detector designed primarily for remote locations, warehouses, and industrial complexes, yet equally suited for offices and private houses. The device can be installed at heights ranging from 6.6 to 13 ft, providing extensive area coverage with no blind zones. With a built-in camera, it is easy to quickly assess the situation at the protected facility. This is possible thanks to four types of photo verification available: by alarm, by scenario, by schedule, and on demand. The false alarm filter distinguishes non-threatening factors, such as swaying tree branches or heat flows. The metal swivel mount allows for flexible adjustment of the viewing angle.
Key features
6.6–13 ft
installation height
Swivel mount
Up to 49 ft
movement detection distance
90° horizontal viewing angle
90° vertical viewing angle
Dual motion detection technology
to trigger the device only when both sensors detect movement
Two-step software algorithm for signal analysis
Software algorithm to prevent false alarms
Temperature compensation
for effective detection in heat and cold
Four types of photo verification
Photo by Alarm
Photo by Scenario
Photo on Demand
Photo by Schedule
Anti-masking system
IR illumination
Magnetometer
to monitor the surrounding magnetic field
Critical
Ajax
Device was moved, MotionCam Outdoor HighMount (PhOD) Jeweller in Entrance
HDR technology for clear photos in any condition
Tamper alarm
to notify of attempts to dismantle the device
Hood
to protect masking sensors from rain and snow
enclosure protection
Over-the-air firmware updates
Up to 5,550 ft
of wireless communication range1
Jeweller and Wings radio communication
Power adjustment
Up to 3 years of operation
on pre-installed batteries
Possibility to connect a 12–24 V⎓
external power supply unit
Informative push notifications
Critical
Ajax
Warehouse: Motion detected, MotionCam Outdoor HighMount (PhOD) in Storage area
Ajax
Office: MotionCam Outdoor HighMount (PhOD) in Office is online again. Connection via Jeweller channel restored.
Remote control and configuration
Hassle-free installation
QR code
SmartBracket
App
In an Ajax system, you can combine devices of all product categories: Intrusion protection (both Superior and Baseline), Video surveillance, Fire and life safety, or Comfort and automation. Create the system to suit your needs and manage it in a single interface.
Captures movement where it is most needed
Keep any commercial premises secure day and night, with no blind zones or false alarms. MotionCam Outdoor HighMount (PhOD) Jeweller detects movement at a distance of 49 ft. The detector instantly takes a series of photos so the user can check the reason for the alarm. All alarms are thoroughly checked at both software and hardware levels. At the software level, the device uses algorithms such as SmartDetect and LISA. At the hardware level, it is equipped with two types of sensors — two PIR sensors and a microwave sensor — to provide dual motion detection. Also, a Fresnel lens differentiates between the PIR diagrams of people and thermal noise.
Wherever there is a risk of intrusion
Construction site
High-risk property
Gas production station
Production facility
No intruder goes unnoticed
PIR sensors
MotionCam Outdoor HighMount (PhOD) Jeweller has two PIR sensors to ensure accurate movement detection. The detector does not respond to a movement if only one of them is triggered. When both sensors detect motion, the digital LISA algorithm comes into play. In a fraction of a second, it performs a two-step signal analysis and decides whether an alarm should be raised.
K-band microwave sensor
The device responds only when both PIR and microwave sensors are triggered. When the PIR sensor detects the movement of an object with a temperature similar to that of the human body, the device performs a radio wave scan using the K-band microwave sensor. This is how the dual motion detection technology works. Unlike traditional X-band sensors, the K-band sensor offers enhanced precision and superior energy efficiency. This results in minimal impact on battery lifespan and significantly fewer false alarms. Additionally, the sensor is completely safe and does not harm human health.
Thermal interferences filter
In armed mode, the detector constantly analyzes the thermal diagram from the PIR sensors, including the IR radiation intensity, thermal spot size, movement speed, time spent in the detection zone, and other parameters. The SmartDetect algorithm filters out potential false triggers such as headlights, lighting devices, and heat flows instantly and with high accuracy. As a result, the detector accurately responds to movement without false alarms.
Temperature compensation
Temperature compensation is a software mechanism that maintains the contrast of the thermal diagram even if the ambient temperature is close to the temperature of the human body. With each ambient temperature measurement, the detector corrects the PIR sensors’ data according to the coefficient table stored in its memory. The detector is effective over the entire operating temperature range.
Sensitivity level
MotionCam Outdoor HighMount (PhOD) Jeweller features three sensitivity levels that can be adjusted through an Ajax app. The optimal sensitivity level depends on the facility type, the presence of potential sources of false alarms, and the specifics of the protected area. A low sensitivity level is suitable for areas prone to false alarms; normal sensitivity is ideal for most facilities, and high sensitivity is recommended for areas with no obstacles.
Professional installation
Proper installation and configuration of a motion detector are key to detecting threats quickly. MotionCam Outdoor HighMount (PhOD) Jeweller should be placed on a vertical surface at a height of 6.6–13 ft. The device’s tilt angle must be adjusted using the swivel mount. The detector sensors should be directed to the expected intrusion path.
MotionCam Outdoor HighMount (PhOD) Jeweller does not have a pet immunity feature.
Peace of mind on demand
HDR technology for clear photos
IR illumination for low light conditions
The first photo is delivered in less than 9 seconds2
Up to 5 photos in a series
MotionCam Outdoor HighMount (PhOD) Jeweller is equipped with a camera to quickly assess the situation at the site. The device takes a series of photos as soon as it detects movement. A series of photos is combined into a GIF or MP4 format to show how the situation develops in the dynamics. The outdoor detector can take a series of photos by request of the user from an Ajax mobile app, regardless of the security mode. Furthermore, the device can take photos on a set schedule or when selected devices in the system activate an alarm.
Photo by alarm
Photo on demand
Photo by schedule
Photo by scenario
Jeweller | Wings
Unique wireless technologies
MotionCam Outdoor HighMount (PhOD) Jeweller uses Jeweller and Wings proprietary radio protocols for reliable communication.
Up to 5,550 ft of radio communication with a hub or range extender1
Encrypted two-way radio communication
Notifications of jamming and connection loss
Over-the-air firmware updates
Scaled and comprehensive
ReX 2 Jeweller range extender boosts the radio range of all Ajax devices via Jeweller and ensures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering multistorey buildings with underground parking and basements.
Up to 5 range extenders within one system
Ethernet as an alternative communication channel
Outstanding autonomy
MotionCam Outdoor HighMount (PhOD) Jeweller delivers impressive autonomy: up to 3 years of operation on pre-installed batteries. The system will notify a security company and users of low battery levels in advance.
A 12–24 V⎓ external power supply unit can be connected to the detector. In this case, pre-installed batteries will serve as a backup power source. An external power supply is not required for the device to receive over-the-air updates.
Ready for heat and cold
MotionCam Outdoor HighMount (PhOD) Jeweller is ready to operate in any weather. The device withstands heat up to 140 °F and cold down to −13 °F. Additionally, the detector can be installed with the hood to protect the anti-masking system from rain and snow.
IP55 protection rating
Efficiency in heat and cold
The hood to protect against rain and snow
Sabotage resistance
Privacy first
Effortless installation and setup
MotionCam Outdoor HighMount (PhOD) Jeweller is ready to operate straight out of the box. Ajax apps help quickly make the device a part of the system: simply pair the device with the hub by scanning the QR code. In the Ajax PRO app for installers, it is possible to check the camera’s field of view and maximum detection zone with the Motion detection area option. Remote configuration and monitoring are also available via PRO apps.
Pairing with an Ajax system via the QR code
Installing using the swivel mount only
Configuring and testing in Ajax mobile and desktop apps
The PRO Desktop app for macOS and Windows3
In an open space.
With default settings (photo resolution is 320×240 px).
Monitoring through PRO Desktop will be available with future device updates.
Technical information
MotionCam Outdoor HighMount (PhOD) Jeweller
Ajax product categories
In an Ajax system, you can combine devices of all product categories: Intrusion protection (both Superior and Baseline), Video surveillance, Fire and life safety, or Comfort and automation. Create the system to suit your needs and manage it in a single interface.
