LineProtect Fibra
Module to protect devices on the Fibra line from short circuits and sabotage
Product is not available in your region
Increased security for wired devices with LineProtect Fibra
LineProtect is a module to protect the Fibra line and devices from electrical sabotage. If an intruder tries to damage the security system and, for example, hits the StreetSiren Fibra with a stun gun, LineProtect will take the hit. All devices between LineProtect and the hub will continue to operate. The module can be installed at any point of the Fibra line. The output line from LineProtect can be up to 2000 meters in length. LineProtect inherits all the advantages of Ajax smart devices: it is easy to control the module from the app, receive event notifications, and configure or test LineProtect remotely.
Discover LineProtect Fibra
Module to protect devices on the Fibra line from short circuit and sabotage
Watch on YoutubeKey features
This is the wired device of the Fibra product line. Only accredited Ajax Systems partners can sell, install, and administer Fibra products.
Protect against electrical shock
LineProtect Fibra protects Ajax hubs and wired devices from sabotage when an intruder causes short circuits, applies 110/230 V~, or uses stun guns. The module monitors the input and output voltage on the Fibra line. If LineProtect detects an abnormal voltage on the line, it activates the fuses and cuts off the power supply to the devices installed between LineProtect and the hub. Note: LineProtect does not protect devices between the module and the end of the line.
Protecting Fibra devices from:
Short circuits
Applying 110/230 V~
Stun guns
High voltage on the Fibra line
Discover future-proof hardware
Separated zones of the device for risk diversification
Pre-installed jumper to activate a termination resistor
Easy to mount into Case
LineProtect is inserted into Case. This casing has an optimal arrangement of wire channels, special holders for the module, and the tamper module. Several variations of casings are available.
You can mount one LineProtect module into Case or fit several devices.The required minimum number of casings can be selected for the facility's needs, which saves the budget and speeds up the installation of the security system.
Case configurator
Get options for the most optimal Сase configurations that consider the Fibra devices you need.
Adapt innovative software to any system
LineProtect is designed to respond to threats quickly without giving intruders a single chance to sabotage the security system. We have developed a unique software algorithm to analyse the line to which LineProtect is connected. During the Lines Power Test, the module receives enough information to set its thresholds for detecting a short circuit and normal voltage values. The algorithm considers all critical parameters to select the optimal thresholds for maximum system protection.
Analyses devices and cable lengths on the line
Using software algorithms to detect sabotage as quickly as possible
Fibra
Unique wired technology
Fibra is a protocol to ensure fast and secure two-way wired communication between the hub and connected devices. Fibra delivers instant data-rich notifications: security companies and users know which device was triggered, when, and where it happened.
Encrypted two-way communication
Connect any Fibra device to the line
The output line up to 2000 meters in length
Energy efficiency as a priority
The module consumes up to 0.17 W at peak consumption times. With such low power consumption, an installer can connect more devices to a single Fibra line and lengthen the wired connectivity.
Fibra communication follows the TDMA principle. Each device has a short time frame to exchange data with a hub. The rest of the time, their communication modules are inactive. This significantly reduces power consumption and helps avoid interferences even when multiple devices communicate simultaneously.
Module’s consumption is up to 0.17 W
TDMA and power-saving modes
Sabotage resistance
Convenient to work for PROs
Installing a wired system is always a challenge. We have taken care of the quick installation of LineProtect Fibra. The module is installed into Case and can be mounted in just a few minutes. With few clicks, it can be connected to the hub in iOS, Android, macOS, and Windows apps. Installers can configure the device remotely in the Ajax apps.
Fibra power supply calculator
Use our online calculator to ensure the Fibra system covers your facility. It helps verify the project of a wired security system and provides additional information for installers.
LineProtect Fibra is installed into Case, which has an optimal arrangement of channels for wires, special holders for the device, and the built-in tamper module. There are several variations with different sizes of casings. Installation kit with dowels and screws included. No tools are required to install LineProtect into Case.
Installation into Case
Сase has special holders to secure the module
Jumper included
Installers can add a module in two ways: automatically scanning lines or scanning a QR code. When scanning lines, there are two ways to identify the desired device: by clicking in the app or tamper activating. When an installer adds a device, it will immediately have a default name and settings are suitable for most cases.
Pairing with a hub via line scanning or QR code
Device identification via triggering or LED indication
Optimal default settings
Forget about configuring via the keyboard. All testing and configuration can be done in mobile and desktop Ajax apps. An installer can work both on behalf of the company and as a sole installer.
Configuration and testing remotely and on-site
Desktop and mobile apps
Accounts for companies and installers
With proprietary protocols, any Ajax system can transmit alarms to the PRO Desktop monitoring app and third-party CMS. When an alarm is received, the monitoring station operator knows what happened and where the rapid response unit has to be sent. All Ajax devices are addressable, so events, the device type, its assigned name and room can be transmitted to PRO Desktop or third-party monitoring software.
Full addressability of the device
Instant notifications in Ajax apps
Alarm and event monitoring in PRO Desktop for monitoring companies
1 - When using a twisted pair cable UTP cat. 5. Other cables may have different values. Fibra power supply calculator.
2 - LineProtect Fibra does not provide additional power supply to the line.
3 - Notification of attempts to break or open Case. Case is sold separately. Learn more
4 - Case has tamper boards. These boards are connected to the LineProtect terminals (indicated as TAMPER on a device board). LineProtect itself does not have a tamper.
5 - The list of transmitted parameters may differ depending on the type of the CMS and the selected communication protocol.
Technical information
Ajax product lines
Superior, Fibra, and Baseline product lines are mutually compatible. This opens up numerous possibilities for building systems of any configuration.