United States
Transmitter Fibra
Soon to be: Superior Transmitter Fibra
Module for integrating one third-party wired detector into an Ajax system
Product is not available in your region
The product name will change soon
It is one of many updates to the Ajax portfolio segmentation.
Tiny gear to boost regular into Ajax
Transmitter Fibra serves two primary purposes: first, to connect functional third-party devices to the Ajax system, enhancing their capabilities; and second, to сonnect specific devices not yet included in the Ajax portfolio. Transmitter Fibra can be easily installed with any third-party device. The module supports all connection types, including 3EOL, provides numerous event types for the connected device, can be remotely configured, and regularly reports its state to the hub.
Discover Transmitter Fibra
Transmitter Fibra is a module to integrate one third-party device into the Ajax system
Watch on YoutubeKey features
Any connection type
with NO, NC, EOL, 2EOL or 3EOL connection
Instant detection
of wired device connection loss1
Installation inside the device enclosure
KeyArm feature
for integrated third-party device
Integration of roller shutter motion detector
Fast connection to wired devices
by measurement of EOL resistors
Up to 2,000 m
range of communication2 with an Ajax hub or a module that extends the Fibra line
Convenient wire connection
due to accessory 5-pin cable
Remote control and configuration
Informative in-app notifications
Critical
Ajax
Production: gas detected, Transmitter Fibra in Workshop No. 1
Critical
Ajax
Office: alarm detected, Transmitter Fibra in Hall No. 1
Chime3
for shops, commercial and non-commercial facilities
Low power consumption
Fibra wired communication
Power adjustment
This is the device of the Superior product line. Only accredited Ajax Systems partners can sell, install, and administer Superior products.
Turns outdated into innovative
After integrating a third-party device via Transmitter, this device can be managed and configured remotely. PRO’s will get remote settings management and scenario setup; end-users will receive push notifications and have in-app security management. This will breathe new life into the devices already installed at the facility or enhance the functionality of new third-party devices that need integration into the Ajax system. The best Ajax user experience will be extended to third-party devices in both directions.
Ajax experience for third-party devices
Roller shutter motion detectors, IR detectors, household gas sensors, thermostats, float sensors, and other devices are ready to expand the Ajax areas of use. Connect them to a hub via Transmitter and manage the combined solution in the Ajax app.
Moreover, alarms or other events from connected devices can be used as automation triggers. Nothing stops to set up a custom automation scenario. Automation scenarios are intended to enhance security or to automate a routine. Their triggering can be alarms or service events — an ideal solution for security and automation.
Versatile security management with KeyArm
A third-party keypad or others access control devices can be connected to the Ajax system. This opens up almost unlimited integration, renovation, and system management possibilities. Thus, the user will be able to control the security of the entire facility, night mode, or even individual groups using a third-party device.
An EOL connection can be used to lock the security management when the tamper of a third-party device is triggered. Only a verified user with the appropriate rights can unlock. This will make it almost impossible to sabotage the system.
Integration of third-party access control devices
Management of different security modes: entire facility, night mode, separate groups
Control locking in case of sabotage
Compatible with any third-party device
Transmitter Fibra can handle almost any third-party device. Due to its small size, the module can fit into the enclosure of most devices. Transmitter supports NC, NO, EOL, 2EOL, and 3EOL connection types. It operates with pulse and bistable devices. Also it has the function of choosing a normal contact state and supports numerous event types for the connected device. The module has two inputs (Z1 and Z2), which allows connecting one device by the AATT scheme or two devices simultaneously. Transmitter also can provide a 12 V⎓ power supply for the connected device, which is a standard for most solutions on the market.
Wide range of compatible devices: from NC/NO to 3EOL
Pulse and bistable operation for any of the device sensors
Selects the NO or NC state for any of the device sensors
Security via smartphone and PC
With Transmitter, system users get security control via app, data-rich notifications, and automation scenarios. An installer can set up the system or device in the PRO-app, both while on-site and remotely. And for monitoring companies, we provide free software for monitoring all events and alarms in Ajax systems.
For users
iOS
Android
For PROʼs
iOS
Android
macOS
Windows
Data-rich alarms and events
With Transmitter, you can specify the device name, the type of alarm, and a room for a connected wired device. This makes notifications more informative — you know what happened and where. This information is displayed using push notifications and SMS and sent to the security company's monitoring station. Numerous types of alarms are available: intrusion, fire, auxiliary alarm, panic button, gas alarm, tamper alarm, malfunction, leakage, custom, and roller shutter alarm etc. Transmitter also notifies about its and the connected device’s faults if they occur. For example, if the connection is lost.
Sends all important information to users and to the hub
Numerous event types for the connected device
Notifications about events of the Transmitter and connected device
Less hassle with automated security
With Transmitter, even an old third-party device becomes part of a safe and smart home. An integrated device's alarms or events can trigger automation scenarios. Use automation scenarios so that the security system instantly responds to threats without waiting for response group or police. Ajax will turn on the light upon the motion detector alarm, switch off potential ignition sources at the first sign of fire, or close the roller shutter and gate in case of an attempt to break the front door.
Fibra
Unique wired technology
An Ajax system uses secure two-way communication based on Fibra proprietary protocol. It features encryption and device authentication to prevent sabotage, spoofing, and data theft. Fibra lines are versatile and support connecting different types of devices to one line: sirens, keypads, and detectors with photo verification.
Up to 2,000 m of wired communication with a hub
One line for different types of devices
Photo delivery via Fibra line without interference
Protection against sabotage and spoofing
Sabotage resistance
Enhanced security for wired devices with LineProtect Fibra
LineProtect is a module to protect the Fibra line and devices from electrical sabotage. If an intruder tries to damage the security system and, for example, hits the StreetSiren Fibra with a stun gun, LineProtect will take the hit. All devices between LineProtect and the hub will continue to operate.
PRO is king
The myth that wired systems are difficult to install has been busted. Ajax has transformed what used to be an expensive, lengthy, and dusty experience for PROs by developing an ultimate set of tools to make the process easy and flexible, from project design to client support and system maintenance. Intuitive Ajax apps ensure the device can be integrated into the system quickly, and each device can be reconfigured remotely without the need for site visits.
Fibra power supply calculator
Use our online calculator to ensure the Fibra system covers your facility. It helps verify the project of a wired security system and provides additional information for installers.
The Transmitter Fibra is installed in the enclosure of a third-party device. The device has the smallest possible size and a accessory 5-pin cable for convenient connection of third-party device. There is no need to measure the EOL resistances of the resistors - the Transmitter can read them and memorize them to the settings.
Smallest module dimensions for installation in any device enclosure
Accessory 5-pin cable for connecting an third-party device - for easier installation
Tool for automatic scanning of EOL resistors
Installers can add a Transmitter in two ways: by automatically scanning lines or scanning a QR code. When scanning lines, they can identify the desired device either by clicking in the app or by triggering the connected device. Once a device is added by an installer, it immediately has a default name and settings suitable for most cases.
Pairing with a hub via line scanning or QR code
Device identification via triggering
Optimal default settings
Forget about configuring via the keyboard. All testing and configuration can be done in mobile and desktop Ajax apps. An installer can work both on behalf of the company and as a sole installer.
Configuration and testing remotely and on-site
Desktop and mobile apps
Accounts for companies and installers
Using proprietary protocols, any Ajax system can transmit alarms to the PRO Desktop monitoring app and third-party CMS. When an alarm is received, the monitoring station operator knows what happened and where to send the rapid response unit. All Ajax devices are addressable, allowing the transmission of events, device type, assigned name, and room to PRO Desktop or third-party monitoring software.
Fully addressability of the device
Instant notifications in Ajax apps
Alarm and event monitoring in PRO Desktop for monitoring companies
- 1 — Valid for EOL, 2EOL or 3EOL connections.
- 2 — With U/UTP cat.5 4×2×0.51 cable. Other cable types may have different values. Please use Fibra power supply calculator to check the wired system project before installation.
- 3 — The Chime feature requires the siren to operate. It functions like a shopkeeper’s bell: when the system is disarmed, the sirens alert users of a door opening.
- 4 — The list of transmitted parameters may differ depending on the type of the CMS and the selected communication protocol.
Technical information
Ajax product categories
In an Ajax system, you can combine devices of all product categories: Intrusion protection (both Superior and Baseline), Video surveillance, Fire and life safety, or Comfort and automation. Create the system to suit your needs and manage it in a single interface.
Ajax Transmitter Fibra: Elevating wired devices integration to the security system
The Ajax Transmitter Fibra is a compact yet powerful module that seamlessly integrates third-party wired detectors into the Ajax security system. Serving a dual purpose, it enhances the capabilities of existing devices and extends compatibility to those not yet part of the Ajax signaling.Ajax Transmitter Fibra key features
There are standout features of this device worth highlighting:- Versatile Connection Compatibility: the Ajax Transmitter Fibra security system integration module supports various connection types, including NO, NC, EOL, 2EOL, or 3EOL. This flexibility ensures compatibility with a wide range of wired detectors, offering users a comprehensive security solution.
- Instant detection for diverse environments: tailored for shops, commercial spaces, and non-commercial facilities, the Ajax Transmitter Fibra wired security devices integration module delivers instant detection, ensuring swift response to security events.
- Low power consumption: the Ajax Transmitter Fibra boasts low power consumption, making it an energy-efficient addition to the Ajax security system. Ajax Transmitter Fibra can supply the connected devices with a voltage of 10.5-15 V⎓ and a current of up to 50 mA, ensuring optimal performance.
- Fibra wired communication: the integration module ensures reliable and secure two-way communication with the Ajax hub by working with the secure Fibra wired communication protocol.
Compatibility and integration
Revolutionize your existing wired security system effortlessly by installing Ajax Fibra, the line of wired security devices. By incorporating Ajax Fibra technology, you can keep and elevate your current wired infrastructure. This allows you to embrace the benefits of advanced technology without abandoning your investments in the existing system. Ajax Fibra integrates with your current wired devices, transforming the security system into a smart and efficient network. With a straightforward installation process, you can enjoy the benefits of modern security without the complexities of a full system replacement. The integration module Ajax Transmitter Fibra supports various connection types, accommodating devices used in older security systems. This ensures a smooth transition to a more sophisticated and comprehensive security solution. The module for integrating wired signaling devices Ajax Transmitter Fibra, part of the Ajax Fibra product line, is available exclusively through only the accredited Ajax Systems partners. This ensures that professionals with expertise in Ajax products manage installation, sales, and administration.Operating principle
Here is how the integration module works after the correct installation:- Event integration: the Ajax Transmitter Fibra alarm integration module seamlessly integrates with the Ajax system, receiving information about alarms, malfunctions, and events from connected devices through a wired connection. The module then communicates this data to the Ajax hub using the Fibra wired communication protocol.
- Secure data transmission: Fibra technology ensures fast and reliable two-way communication between the hub and the security system integration module. With block encryption and dynamic keys, the protocol safeguards against sabotage and spoofing, providing a secure communication channel.
- Event notification: the Ajax system transmits alarms to both the PRO Desktop monitoring app and the central monitoring station (CMS) in various protocols such as SurGard (Contact ID), SIA DC-09 (ADM-CID), ADEMCO 685, and more. Ajax Transmitter Fibra can transmit events, including alarm/restoration of connected devices, loss/recovery of communication, and activation/deactivation of the module and connected devices.