Language:

OBUbeD

MotionProtect S Plus Jeweller

KCo5mP: Superior MotionProtect Plus Jeweller

Wireless IR motion detector with an additional K-band microwave sensor. Superior edition

MotionProtect S Plus Jeweller

yA5lgs

9td1Wl

Communication

Jeweller communication technology

Proprietary wireless communication technology to transmit commands, alarms, and events.

Key features:

  • Two-way communication.
  • Advanced sabotage protection.
  • Block encryption featuring a dynamic key.
  • Instant notifications.
  • Remote configuration in the Ajax apps.

Frequency bands

868.0–868.6 MHz

Maximum effective radiated power (ERP)

up to 20 mW

Automatic power control to reduce power consumption and noise interference.

Radio signal modulation

GFSK

Radio signal range

up to 3,900 ft

Between detector and control panel (or range extender) in an open space.

Encrypted communication

All the data stored and transmitted are protected by block encryption with a dynamic key.

Frequency hopping

Radio communication uses frequency hopping to prevent interception and jamming.

Detection

Sensitive element

PIR sensor

microwave sensor

K-band microwave sensor to prevent false alarms caused by thermal interference.
Operation frequency: 24 GHz.

Motion detection distance

up to 39 ft

When installed at the height of 7.9 ft.

Motion detection angles

horizontal: 88.5°

Motion detection speed

from 1 to 6.6 ft/s

The direction of the detector lens should be perpendicular to an alleged intrusion path into the facility.

Sensitivity

3 levels

Adjusted by PRO or user with admin rights in the Ajax app.

Pet immunity

weight:up to 44 lb
height:up to 1.6 ft

False alarm prevention

SmartDetect

Software algorithm.

Temperature compensation

Effective motion detection at temperatures from 14 °F to 104 °F.

ttx
ttx

Recommendations

It is recommended to install the detector at a height of 7.9 ft.

The device is designed for indoor use only.

Sabotage protection

Tamper alarm

Notifications on attempts to detach the detector from the surface or remove it from the mounting panel.

Holding screw

to secure the detector on SmartBracket

Protection against spoofing

device authentication

Communication loss detection

after 36 s

Detection time depends on the Jeweller or Jeweller/Fibra settings.

Power supply

Battery

1 × CR123A

Pre-installed.

Type

Type C.

Calculated battery life

up to 5 years

Detector’s operating voltage range

2.1−3.3 V⎓

Detector’s nominal operating voltage

3 V⎓

Quiescent detector’s current consumption at nominal voltage

0.019 mA

Maximum detector’s current consumption at nominal voltage

2.75 mA

Full capacity

1,600 mAh

Low battery voltage

2.5 V⎓

End of life battery voltage

2.1 V⎓

Device is switched off.

End of life battery capacity

300 mAh

Manufacturer

Panasonic

Enclosure

Dimensions

4.33″ × 2.56″ × 1.97″

Weight of the white device

3.70 oz

Weight of the black device

3.35 oz

Operating temperature range

from 14 °F to 104 °F

Operating humidity

up to 75%

Protection class

IP50, IK04

Colors

Black

White

Complete set

MotionProtect S Plus Jeweller

SmartBracket mounting panel with holding screw

CR123A battery (pre-installed)

Installation kit

Quick start guide

hQt5e6

MotionProtect S Plus Jeweller

MotionProtect S Plus Jeweller

Compliance with the security alarm standards

Certificate issued by TREZOR TEST s.r.o.

EN 50131-1:2006 / A1:2009 / А2:2017 / A3:2020

EN 50131-2-4:2020

EN 50131-5-3:2017

EN 50131-6:2017 / A1:2021**

PD 6662:2017*

Security Grade (SG)

Certificate issued by TREZOR TEST s.r.o.

2

Radio Equipment Directive (RED)

Certificate issued by MiCOM Labs

EN 300 220-1 V3.1.1

EN 300 220-2 V3.2.1

Restriction of Hazardous Substances Directive (RoHS)

Test report issued by Shenzhen NTEK Testing Technology Co.

EN IEC 63000:2018

Electromagnetic Compatibility Directive (EMC)

Certificate issued by MiCOM Labs

EN 301 489-1 V2.2.3

EN 301 489-3 V2.1.1

Low Voltage Directive (LVD)

Certificate issued by MiCOM Labs

EN 62479:2010

EN 62368-1:2014+A11:2017

Environmental class according to EN 50131

Certificate issued by TREZOR TEST s.r.o.

||

INCERT

Kiwa Nederland B.V.

T 031:2017+A1:2018+A2:2022

Certification

Certification NF&A2P – 2 Boucliers suivant le référentiel NF324-H58

Organismes certificateurs:

www.cnpp.com

www.marque-nf.com

Certificat №: 2824050004A0

  • NF324/H58
  • NF EN 50131-2-4
  • RTC 50131-2-4
  • NF EN 50131-5-3
  • NF EN50130-4
  • NF EN50130-5

PSTI UK

BSI Assurance UK Limited

Schedule 1

fOP7Wy

Compliance with standards

Learn more

Warranty

IJMDvP

Learn more