MotionCam (PhOD) Fibra

Fibra communication technology

Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection.

Key features:

• Two-way communication.
• Advanced anti-sabotage.
• Instant notifications.
• Remote configuration in the Ajax apps.

Line connection

4-core cable

Fibra line length

up to 6,550 ft

When using the U/UTP cat.5 twisted pair cable.

Encrypted communication

Photo by Alarm

The built-in camera is activated if the detector is armed and motion is detected.

Photo on Demand

The user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default.

Photo by Scenario

The detector’s camera takes pictures automatically when other Ajax detectors are triggered. The feature is disabled by default.

Photo by Schedule

The detector automatically takes photos at a specified time. This feature is available for hubs with firmware version OS Malevich 2.19 or higher.

Adjustable photo resolution

640 × 480 px
320 × 240 px (default)
160 × 120 px

Adjusted by a PRO or user with admin rights in the Ajax app.

IR backlight

For night photography and low light conditions.

Series of pictures

from 1 to 5 snapshots

Adjusted by a PRO or user with admin rights in an Ajax app.

Photo delivery

up to 7 s — 160 × 120 px resolution
up to 9 s — 320 × 240 px resolution
up to 20 s — 640 × 480 px resolution

Photo delivery time depends on the image resolution selected in the device settings.

Tamper alarm

2 tampers

Both are needed to fasten the left or right side of the detector’s mounting panel. The system receives notifications about attempts to detach the device from the surface or remove it from the mounting panel.

Protection against spoofing

device authentication

Fibra line power supply

7−30 V⎓, up to 120 mW

The detector is powered by the control panel.

Detector’s nominal operating voltage

24 V⎓

Quiescent detector’s current consumption at nominal voltage

0.569 mA

Maximum detector’s current consumption at nominal voltage

14.2 mA

Sealed battery

LTO AA

It is used when the detector takes photos, activates an IR backlight, and transmits an alarm. The battery is charged from the Fibra line.

Detector’s nominal operating voltage

2.4 V⎓

The detector is powered by the sealed battery.

Quiescent detector’s current consumption at nominal voltage

0.001 µA

Maximum detector’s current consumption at nominal voltage

568.7 µA

MotionCam (PhOD) Fibra

SmartBracket mounting panel

Installation kit

Quick start guide