United States
HomeSiren Jeweller
Wireless siren with an LED connector
Loud and reliable
HomeSiren Jeweller is a smart indoor device that does more than alerting alarms. It can also serve as a security status indicator, notify of door openings, and display delays when entering or leaving and after-alarm. The device operates autonomously on pre-installed batteries for up to 5 years and uses wireless Jeweller radio protocol to communicate with a hub or range extender at a distance1 of up to 6,500 ft. HomeSiren Jeweller is protected at hardware and software levels and easy to control via Ajax apps.
Adjustable volume for alarms and notifications
Adjustable duration of alarms3
Built-in LED indicator
Possibility to connect a third-party LED indicator
Chime feature2
After-alarm indication
Up to 6,500 ft
of wireless communication range1 with an Ajax hub or range extender
Jeweller radio communication
Power adjustment
2 colors
Indication of security mode change and delay when entering or leaving
Informative push notifications
Ajax
Lid is open, HomeSiren Jeweller in Bedroom
Up to 5 years
of operation on batteries
Remote control and configuration
In an Ajax system, you can combine devices of all product categories: Intrusion protection (both Superior and Baseline), Video surveillance, Fire and life safety, or Comfort and automation. Create the system to suit your needs and manage it in a single interface.
Alarm and event alerts for any facility type
Office
School
Car service
Apartment
Restaurant
Barbershop
Gym
Store
Medical center
House
Discover future-proof hardware
LED indicator
Buzzer
Connector for a third-party LED indicator
Tamper button
SmartBracket mounting panel
Pre-installed batteries
Jeweller antenna
Ready-to-use fixing points
One device. Five missions
Informs about any alert
The siren deters intruders and notifies of fire detection, water leaks, and other alarms. An installer can set up the detector that triggers the sound and LED indication.
Indicates the delays
HomeSiren Jeweller can be set to indicate a delay when entering or leaving. If the feature is on, the built-in LED and sound remind a user that the system needs to be disarmed.
Displays a security mode
The siren’s LED indicator can turn on to show that the system is armed or that the security mode has changed or be always on to avoid unwanted tracking. Also, sound indication and third-party LEDs can be used.
Notifies of door opening
HomeSiren Jeweller can make a special sound to indicate that the opening detector’s sensors are triggered when the system is disarmed. It is a Chimes feature, and it is perfect for stores. Employees will immediately know about new visitors.
Signals the after-alarms
Once active, the siren’s LED indicator shows confirmed and unconfirmed alarms and lid openings.
An external LED can be installed outside to monitor the security system status.
Wire-free flexibility and reliable performance
Baseline devices operate without any wires and offer maximum flexibility during installation. The pre-installed CR123A batteries from proven manufacturers ensure hassle-free setup and require no additional steps to start operating the devices. After the batteries are tested in real-time at the production stage, Ajax Systems inspects every unit to ensure the accuracy of the battery characteristics. The batteries are easy to replace after approximately 5 years of autonomous operation. Users and security companies can always check the battery status via Ajax apps and anticipate maintenance thanks to early low-battery warnings.
Real-time testing during battery production
Up to 5 years of autonomous operation
Low battery level notification in advance
Jeweller
Unique wireless technology
An Ajax system uses two-way secure radio communication based on the Jeweller proprietary protocol. It provides block cipher encryption and device authentication at each communication session with the hub to prevent sabotage, spoofing, or data theft.
Up to 6,500 ft of radio communication with a hub or range extender1
Encrypted two-way radio communication
Notifications of jamming and connection loss
Scaled and comprehensive
For complex radio signal conditions, the ReX Jeweller range extender boosts the range of all Ajax devices and manages their communication with the hub via Jeweller. And ReX 2 Jeweller assures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering multistorey buildings with underground parking and basements.
Up to 5 range extenders within one system
Ethernet as an alternative communication channel
System supervision
All Ajax devices perform automatic self-diagnosis and report their states to the hub. Essential parameters, including tamper, communication, power supply, and sensor statuses, are continuously monitored. The Ajax Cloud server controls communication between the hub and Ajax apps, ensuring instant notifications for CMSs, security companies, and users. In case of any malfunction or communication failure, an engineer is informed immediately to provide necessary services.
Automatic device self-diagnosis with a state report
Regular polling to display the current device state on apps
Instant maintenance notifications
Sabotage resistance
Effortless installation and setup
HomeSiren Jeweller is ready to operate straight out of the box. Using the SmartBracket mounting panel, an installer can effortlessly mount the device on the wall, eliminating the need to disassemble the enclosure. Ajax apps facilitate quick integration into the ecosystem: simply pair the device with the hub by scanning the QR code. It can always be reconfigured remotely without the need for on-site visits.
Pairing with the hub via the QR code
SmartBracket mounting panel — no need to disassemble the enclosure for installation
Configuring and testing in mobile and desktop apps
PRO Desktop app for macOS and Windows
In an open space.
Requires additional installation of an opening detector.
From 3 s to 3 min; up to 15 min for sirens with NA 5.60.4.14 firmware version or later.
Technical information
More Ajax siren models
StreetSiren DoubleDeck Jeweller
Wireless siren with a clip lock for a branded faceplate
Color:
Brandplate
Customized faceplate for DoubleDeck siren branding
Ajax product categories
In an Ajax system, you can combine devices of all product categories: Intrusion protection (both Superior and Baseline), Video surveillance, Fire and life safety, or Comfort and automation. Create the system to suit your needs and manage it in a single interface.
The role of the siren in the security alarm system
A vital element of the burglar alarm is an audible siren — a device that, with its signal, scares off the intruders or draws attention to interference. In this way, theft or damage to property can be prevented by using the alarm siren. One more important function of the siren is connecting an alert about triggering sensors (turning off gas or smoke) or about an alarm button pressing. By attracting attention, users can prevent the danger in time. Sirens are classified according to the specified parameters:- Installation options — indoor and outdoor;
- Types of the signal transmission — wireless and wired;
- By the presence of a battery — with and without a battery;
- By signal type — sound (pulsating and continuous) and light and sound (combined).
Indoor and outdoor sirens
Outdoor alarm sirens are set in private houses, warehouses and offices. The outdoor siren should be mounted at the height of at least 2.5 m and on the front side of the facade. Such an installation requires a complex dismantling of the security device and will open up the siren sound to more neighbors. Most security sirens are suitable for outdoor installation. In apartments, it is not customary to mount a room siren in the entrance or on the house's facade. Here, in most cases, an alarm siren appears next to a security device or even hides inside the case. Compact sirens, despite their size and price, sound loud.Wireless and wired sirens
Wireless sirens are prized for their wiring-free installation. The range of wireless sirens is up to 100 m, and, as a rule, additional installation of a signal amplifier is not required for them. The signal strength of the wireless siren is 100-120 dB. The wireless siren can be installed indoors or outdoors. Wired sirens require mandatory cable laying and have a noise level of up to 110 dB. This type of siren can be observed both from the outside and inside of the room.Sound and light-sound security sirens
An audible siren can scare off a burglar with a loud sound and draw attention to a room where a dangerous situation can happen. The light and sound security device, together with the sound of the siren, also sends a light signal. Since it is not always possible to properly hear where the sound is coming from, a siren with a light indication will indicate the side of a room where the alarm is triggered.Selecting a siren for the security system
When choosing a siren for the security system, you should pay attention to the following additional features:- Availability of notification of jamming or encryption of communication with the network — in case of interruption of transmission with the control panel, users of the security system will be notified of signal interference.
- The presence of a temperature sensor — supervisory siren operation on temperature sensors.
- Compatibility with textures and types of control panels — new models of sirens can often be connected to the types of common security centres and GSM alarms.
- Tamper protection — the siren's enclosure protection against tampering is essential for the covering. Tamper is a device, the presence of which ensures that when an attempt is made to open the siren, the siren will immediately turn on.
- Support of the two-way communication — all information about the operation of the security system will be available on the central security unit.
- Setting the sound power and duration of the security siren signal — availability to adjust the security system.
- The ability to connect an external LED — allows you to scare off the burglars (in case of detection, for example, at the front door) and always provides a clear understanding of whether the room is on alarm.
- The strength and appearance of the case — anti-vandal protection is crucial as well. Siren cases made of polycarbonate (plastic) or metal are considered durable. Such a coating is able to protect the body of the device from external factors and from intrusion.
The ability to choose the device's colour is not the last moment when choosing security devices, as is the type of security siren in the interior.
Wireless Ajax HomeSiren for alarm system
Ajax HomeSiren is intended for indoor installation. The complete set includes a siren, a mounting kit, a connector for connecting an external LED and the instruction. The indoor wireless siren is almost four times smaller than the outdoor one. The dimensions give more opportunities to hide it to make it as difficult as possible for the intruders to find and dismantle it. The Siren is also protected from unauthorized dismantling by tamper, which has already become a standard of the equipment line of Ajax Systems. When an attempt is made to disarm the siren, even if the system is not armed, the user receives a notification on the phone. To enable a wireless siren, the user needs to turn the rear panel of the siren fastening counterclockwise until it is free from the fasteners, open the panel and press the power button until a characteristic click sounds. In this case, the LED located in the upper right corner of the siren will blink green. External power connection is not provided. The wireless siren for the home is entirely ready to be connected to the security system right away. The Ajax HomeSiren connection is carried out in the same way as for other devices — through the Ajax application. The Ajax HomeSiren home siren has an adjustable sound level from 80 to 98 decibels. The colour of the wireless home siren can be black or white.- Siren alarm time — from 3 seconds to 3 minutes.
- Armed light — the LED on the siren and the external LED will blink when the system is armed.
- Internal siren volume — three levels from 80 to 98 dB.
- The home siren is connected via the Jeweller secure radio protocol to the Hub. The communication range with the smart control panel is up to 2000 m in an open space without external obstacles.
- Ajax Home Siren only works with Ajax hubs and range extenders.