Language:
Curtain Outdoor Jeweller

Curtain Outdoor Jeweller

Wireless dual-technology curtain motion detector for outdoor and indoor use

Product is not available in your region

The first line of defense

Curtain Outdoor Jeweller is a motion detector for covering the perimeter of a site with exceptional accuracy and a near-zero chance of false alarms. Featuring a unique optical system, the device looks over narrow sectors of up to 39 ft long. Dual motion detection technology engaging two PIR sensors and one Ka-band microwave sensor allows filtering out false alarms caused by thermal noise, animals, or plants. The detection range and pet immunity mode are configured via a slider on the detector’s enclosure, and sensitivity is configured in Ajax apps to meet the specific needs of the site. Pre-installed batteries ensure stable performance for up to three years.

Vertical viewing angle1:

Vertical angle 85
Vertical angle 15
Adjustable motion

Adjustable motion detection range

Hood

to protect masking sensors from rain and snow

Hood

Horizontal viewing angle: 8°

Horisontal angle

Dual motion detection technology

to trigger the device only when both types of sensors detect motion

SmartDetect

Software algorithm to distinguish human movement from pet and other non-human activities

Temperature compensation

Temperature compensation

for effective detection in heat and cold

Can be fixed to a third-party mount

Third party

Pet immunity

as an optional detection mode

Pet immunity

Tamper

Tamper
Anti-masking

Anti-masking system

Accelerometer

Accelerometer

Battery

Up to 3 years

of operation on pre-installed batteries

ip-55

Enclosure protection

Over-the-air firmware updates

Up to 5,500 ft

communication range with an Ajax hub or range extender2

Jeweller and Wings radio communication

Jeweller and Wings radio communication

Power adjustment

Informative push notifications

Ajax logo
10:00

Critical

Ajax

Warehouse: Motion detected, Curtain Outdoor Jeweller in Storage area

Ajax logo
10:00

Ajax

Office: Lid is closed, Curtain Outdoor Jeweller in Hall

Remote configuration

Remote control and configuration

Corner

Optional angle mount

to install the detector sideways

Holding screw

Holding-screw

Hassle-free installation

1

QR code

2

SmartBracket

3

App

Devices compatibility

Superior, Fibra, and Baseline product lines are mutually compatible. This opens up numerous possibilities for building systems of any configuration.

Reliable perimeter protection

Office

Office

Restaurant

Restaurant

Warehouse

Warehouse

Hangar

Hangar

House

House

Manufacturing

Manufacturing

Two operating modes

Curtain Outdoor Jeweller operates in two modes: regular and with pet immunity on. In the regular mode, any motion within the covered area triggers an alarm. The pet immunity mode is designed to ignore the movement of animals up to 3.28 ft tall and minimize false alarms.

Without pet immunity

Without pet immunity

With pet immunity

With pet immunity

Facility-specific motion detection

The device offers up to 39 ft of detection range, which, however, can be adjusted to fit the peculiarities of a site. For example, the range can be set for the detector to cover doors and windows yet to ignore high-traffic zones like a walkway. Detection sensitivity levels are also essential to limit false patrol dispatches. Set the sensitivity to low in areas prone to false alarms, medium for most sites, and high in obstacle-free zones where immediate threat detection is crucial.

Facility-specific

Flawless hardware

Fresnel lens

Fresnel lens

Two PIR sensors

Two PIR sensors

K-band microwave sensor

K-band microwave sensor

Slider

Slider to change operating mode and detection range

Jeweller and Wings antennas

Jeweller and Wings antennas

Tamper

Tamper

Hood

Hood

Accelerometer

Accelerometer

Masking sensors

Masking sensors

SmartBracket mounting panel

SmartBracket mounting panel

Holding screw

Holding screw

Angle mount

Angle mount

Keep false alarms at bay

Two PIR sensors

Curtain Outdoor Jeweller has two PIR sensors to ensure accurate motion detection. The detector does not respond to a movement if only one sensor is triggered. When both sensors detect motion, proprietary digital algorithms come into play. In a fraction of a second, they perform a three-step signal analysis, filter out natural obstacles or animals, and decide whether an alarm should be raised.

2 PIR sensors

K-band microwave sensor

The K-band microwave sensor verifies alarms triggered by PIR sensors. It performs a radio-wave scan of an area to minimize false alarms triggered by thermal interferences. Unlike traditional X-band sensors, the Ka-band sensor offers superior precision and energy efficiency, with significantly fewer false alarms and hardly noticeable impact on the battery life. Additionally, the sensor is completely safe and poses no threat to health.

K-band

K-band

X-band

X-band

Thermal interferences filter

SmartDetect

When the system is in armed mode, the detector constantly analyzes the thermal diagram from the PIR sensors, including the IR radiation intensity, thermal spot size, movement speed, time spent in the detection zone, and other parameters. The SmartDetect software algorithm identifies false alarm markers instantly and with high accuracy. As a result, the device accurately responds to human movement without false alarms.

Size false alarm

False alarm

Real alarm

Real alarm

Speed false alarm

False alarm

Real alarm

Real alarm

Intensity false alarm

False alarm

Real alarm

Real alarm

Temperature compensation

Temperature compensation is a software mechanism that ensures thermal diagram contrast even if the ambient temperature is close to the temperature of a human body. With each ambient temperature measurement, the detector corrects the PIR sensors data according to the coefficient table stored in its memory. The device is effective throughout the entire operating temperature range.

Temperature compensation

Sensitivity level

Curtain Outdoor Jeweller has in-app sensitivity settings. Low sensitivity makes the detector less likely to respond to interferences, while high sensitivity ensures an alarm is raised in case of any movement in the detection zone. Set up the needed sensitivity level to avoid costly patrol dispatches to false alarms.

Sensitivity level

Professional installation

With the correct installation, the detector performs with high precision. The device should be perpendicular to the ground level, while the potential path of an intruder should be perpendicular to the axis of the detector’s lens. When configured with the correct operating mode, sensitivity, and detection range, Curtain Outdoor Jeweller instantly responds to real threats and generates barely any false alarms.

Professional installation
Unique wireless technology

Jeweller | Wings

Unique wireless technologies

Curtain Outdoor Jeweller uses Jeweller and Wings proprietary radio protocols for reliable communication.

Up to 5,550 ft of radio communication with a hub or range extender2

Encrypted two-way radio communication

Notifications of jamming and connection loss

Over-the-air firmware updates

Scaled and comprehensive

ReX 2 Jeweller range extender boosts the radio range of all Ajax devices via Jeweller and assures stable communication even through steel and concrete via Ethernet using the wire as the additional communication channel. Up to 5 range extenders can operate within one Ajax system to expand the network twice as big, covering multistorey buildings with underground parking and basements.

Up to 5 range extenders within one system

Ethernet as an alternative communication channel

System supervision

All Ajax devices perform automatic self-diagnosis and report their states to a hub. Essential parameters, including tamper, communication, power supply, and sensor statuses, are continuously monitored. The Ajax Cloud server controls communication between the hub and Ajax apps, ensuring instant notifications for alarm receiving centers (ARCs), security companies, and users. In case of any malfunction or communication failure, an engineer is informed immediately to provide necessary services.

Automatic device self-diagnosis with status report

Regular polling to display the current device state on apps

Instant maintenance notifications

System supervision

Sabotage resistance

Tamper alarm

Tamper alarm

The enclosure is equipped with a tamper button, which notifies a security company and users once the detector is dismantled from the mounting panel.

Accelerometer

Accelerometer

When enabled, a built-in accelerometer alerts about sabotage. Sirens added to the system are activated when Curtain Outdoor Jeweller moves. The feature is crucial if a third-party mount is used. The accelerometer can detect if it is broken or if there are interferences with the detector’s field of view.

Anti-masking system

Anti-masking system

The device detects masking caused by obstacles at a distance of up to 1.9 inches from the lens depending on the masking method used. The system notifies users and the ARC of these attempts to interfere with the detector’s operation.

Device authentication against spoofing

Device authentication against spoofing

The hub checks the device's unique parameters for authentication during each communication session. If any parameter fails the check, the hub ignores device commands.

Data encryption

Data encryption

All data the system stores and transmits is protected by block encryption featuring a dynamic key. This encryption deters intentional sabotage attempts on the detector.

Regular polling

Regular polling

The device regularly exchanges data with the hub. The system controls each device state and reports if there is a malfunction.

Data-rich notifications

Data-rich notifications

The Ajax system instantly notifies of alarms and events with informative notifications: security companies and users know exactly which device triggered, when and where it happened.

Connection loss detection

Connection loss detection

With minimal polling interval settings (3 data packages in 12 seconds), it takes 36 seconds to identify communication loss and notify the security company and users of the incident.

Effortless installation and setup

Curtain Outdoor Jeweller is ready to operate straight out of the box. There are three options for installing the detector: using the SmartBracket mounting panel, an angle mount, or a third-party mount. There is also an option to protect masking sensors from rain and snow with the hood. Ajax apps help quickly make the device a part of the system: simply pair the device with the hub by scanning a QR code. The detector can always be reconfigured remotely without the need for on-site visits.

Pairing with the security system via a QR code

Connection

To the SmartBracket mounting panel

Installation

To the angle mount

Installation

To the third-party mount

Installation

Configuring and testing in mobile and desktop apps

Setup

PRO Desktop app for macOS and Windows

Monitoring
1

Depends on the installation height. The angle is 85° at 7.87 ft and 15° at 3.28 ft.

2

In an open space.

Ajax product lines

Superior, Fibra, and Baseline product lines are mutually compatible. This opens up numerous possibilities for building systems of any configuration.